Frequently Asked Questions

Place the protector on the door (magnets hold it in place) then place the safety strap through the side of the vehicle's door and closed the door.  This takes about 10 seconds to install. Our door protector was designed for protection on multiple auto body shapes and styles and can be adjusted to the position you desire.  

However, our door protector WILL NOT attach to vehicles built with fiberglass or aluminum; however, can still be used to protect the door.  Contact us for details on how this can be done!

NO, our car door protectors are manufactured with 1 inch shock-absorbing polyethylene foam covered with Sunbrella built-in UV protection and fade resistance, water-repellent Canvas.  Our Ding-B-Gone car door protectors are perfect when parking at airports, shopping malls, supermarkets, commuter parking lots, long-term parking garages or when parking in a tight space.

YES, We Use No Touch Magnets: Built into the protector, and encased by the fabric, are 12 powerful rare earth magnets across the top of the protector plus 2 powerful rare earth magnets aligned at the bottom of the protector.  This magnetics hold the protector in place and because they're encased with the fabric, DO NOT touch your door; therefore, cannot scratch the door.

NO, our door protector was designed to be used while the vehicle is parked.

YES, our door protector utilizes a safety strap that is placed inside the vehicle.  Place the protector on the door (magnets hold it in place) then place the safety strap through the side of the vehicle's door and closed the door.  This takes about 10 seconds to install.

Returns are accepted by us with a 14 day notification after you receive our product.  Buyer is responsible for return shipping cost. (We do not assume responsibility for improper or uncommon use of our product).  For additional information, please contact us or read our Terms and Conditions.

Easy care and maintenance of your protector fabric:

1. Brush off all loose dirt with a soft bristle brush
2. If needed, evenly spray on a cleaning solution (can be simply water or a brand trusted soap)
3. Gently and evenly clean the fabric with a soft bristle brush
4. Rinse thoroughly until all the soap residue is gone
5. Allow for fabric to air dry